Which underlayment should I choose for engineered wood floors?

Underlayment helps compensate for small rough spots on the substrate, while reducing sound transmission or insulating depending on the type. Quick-Step recommends using an underlayment compatible with the floor code to achieve the stability and walking feel of the design.

How to choose lining according to needs

There is a suitable type of flooring for every room and every situation. Stop for a moment to think about what exactly you need.

• Is this a room that you will go around only occasionally, such as a Bedroom or one AtticIf so, you can choose for our budget-friendly one Quick Step Basic Plus price list below.
  
  
• Or will you install your floor in one living room or kitchen, is something much more than that. High traffic areaIf so, a sound absorbing coating would be a better choice, like ours Unisound Quick Step
  
  
• You want it avoids footsteps as far as possible to create a peaceful working or living environment? Quick-Step Silent Walk This is also the platform you need to use in case you have one Hot floor!


• If the floor on which you intend to lay hardwood flooring is quite hard, then you should put a thin floor board on it. illegalIf you plan to install it on an existing tile floor, try using a mortar mixer to mix the mortar with water. Thermolevel quickly Underlay is your best choice: it smooths out any irregularities in the underfloor (irregularities can be up to a maximum of 4 mm). 
  
  
• All of our laminates will protect your floors against increased moisture.